GeoSCO2 - GeoAlarm Wireless GeoSeries™ Encrypted Smoke/Carbon Monoxide Detector
GeoSCO2 Product Description:
The GeoSCO2 is a wireless GeoSeries™ encrypted smoke and carbon monoxide sensor that the presence of smoke and/or carbon monoxide gas in a home or building. Carbon monoxide (CO) is an odorless, colorless, tasteless gas that can be lethal in high concentrations, making carbon monoxide detection critical for maintaining the safety of building occupants. This wireless combination smoke/heat detector is designed to be integrated into the GeoAlarm wireless home security system platform. When the GeoSCO2 sensor detects smoke or CO gas, it will then transmit an alarm notification to the GeoAlarm control panel (GeoCP-AT/GeoCP-VZ), end-user, and GeoArm central monitoring station informing everyone selected of an alarm initiating event.
Product Features:
- Encrypted GeoSeries™ wireless technology
- Aesthetically pleasing seamless installation
- Transmits tamper and low battery alarms
- Choose either wall or ceiling mount
- Up to 23 foot detection range
- Compatible with GeoAlarm smart security and automation panel
GeoSCO2 Product Specifications:
- Dimensions (Height): 1.81 in. w/Base (45.97 mm)
- Dimensions (Diameter): 124.97 in. ( mm)
- Tamper: Yes (Cover)
- LEDs: RGB (Status Indicator)
- Main Button: Multi-functional
- Wired: No
- Case Material: PC + ABS
- Finish/Color: White
- Sound Level: 85dB @ 3M
- Battery: CR123A 3V Lithium Battery x1
- Standby Current: 42 µA
- Active Current - RF Only: 8 mA
- Active Current - CO Alarm: 14.87 mA
- Active Current - Smoke Alarm: 74.17 mA
- Operating Temperature: 32 and 120.2°F (0 and 40°C)
- Relative Humidity (Storage): 80% Max. (non-condensing)
- Weather Resistant: N/A
- Transmitter Frequency: 433 MHz
- Wireless Signal Range: Up to 492 ft.* (Open air, with Security Panel**)
- Modulation: OOK
- Encryption: Yes (1-Way)
- Frequency Hopping: N/A
- Supervision: Yes (60 minutes)
- Regulatory: FCC, IC, CE (TBD), UL2034, UL2075, UL217
* The front of the Detector is facing the panel LCD. The panel is installed at a height of 4.92 ft. The Detector is installed at a height of 4.92 ft.
** The location of the Sensor can have a significant effect on range. In open/unobstructed situations, the transmitter range may be greater. In adverse wireless conditions, you may encounter a decrease in range.
GeoSCO2 Installation Tips:
For maximum protection, it is recommended to install the GeoSCO2 smoke/carbon monoxide sensors in several areas of your home or building.
Here are some guidelines to consider:
1. Install at least one smoke/carbon monoxide detector on every level of your home, including the basement and attic.
2. Install a detector in every bedroom or sleeping area.
3. Install detectors in areas where there is a fuel-burning appliance, such as a furnace, water heater, or stove.
4. Install a detector in the hallway near the kitchen, to detect any smoke or carbon monoxide from cooking.
5. Install a detector in a central location, such as the living room or family room.
▼ GeoSeries™ Encrypted Security Sensors ▼
List Price: $23.97
Your Price: $15.98
List Price: $26.97
Your Price: $17.98
List Price: $43.47
Your Price: $28.98
List Price: $59.97
Your Price: $39.98
List Price: $31.47
Your Price: $20.98
List Price: $32.97
Your Price: $21.98
List Price: $23.97
Your Price: $15.98
List Price: $94.47
Your Price: $62.98
▼ GeoAlarm Video Surveillance Products ▼
List Price: $251.97
Your Price: $167.98
List Price: $284.97
Your Price: $189.98
List Price: $52.47
Pre-Order: $34.98
▼ GeoAlarm Home Automation Devices ▼
Product Reviews
Needed these and installed them myself!, November 9, 2023
Posted By: Vincent
16 people found this review helpful
Installing and programming this device was so easy thanks to GeoArm's Tech Team, Manuals, and Instructional Videos on Youtube! I usually do not do things like this myself as I have a bad problem of getting in over my head on things from time to time, but this was almost too easy. After testing and realizing my programming was good, I even got kudo's from the Tech Team for my Handy Work! Thank GeoArm, the GeoAlarm System and specifically the GeoSCO2, are game changing!
16 people found this review helpful
Installing and programming this device was so easy thanks to GeoArm's Tech Team, Manuals, and Instructional Videos on Youtube! I usually do not do things like this myself as I have a bad problem of getting in over my head on things from time to time, but this was almost too easy. After testing and realizing my programming was good, I even got kudo's from the Tech Team for my Handy Work! Thank GeoArm, the GeoAlarm System and specifically the GeoSCO2, are game changing!
