Please Note: The 2GIG-DW30E-900 wireless E+ extended range outdoor door/window contact is a pre-order item.
The 2GIG-DW30E-900 wireless, E+ extended range encrypted, outdoor alarm contact is designed to be installed on outside objects that open and close. The 2GIG DW30E-900 door/window contact is an all weather security solution that sends alarm signals to the 2GIG EDGE control panel (FW 1.3 or later is required), when a magnet mounted near the sensor is moved away from or closer to the sensor's transmitter.
The E+ series provides expanded, reliable security coverage to large, multi-level homes and light commercial facilities The door/window sensor also comes equipped with a cover tamper for additional security. It communicates with the EDGE wireless control panel using the secure 900 MHz frequency spectrum.
Designed to withstand extreme temperatures from -40° to 140°F, the 2GIG-DW30E-900 is an IP56 rated sensor that is ready to protect property in any region in various weather conditions. Its versatile design allows for easy installation on gates, garages or poles, making it perfect for curved spaces. With a range of up to 2KM* and a 5-year battery life, it provides comprehensive and reliable security.
Product Features:
- Extended wireless range with up to 2KM* (1.2 miles) using 900 MHz spectrum
- Designed for extreme weather conditions (IP56) and water resistant (-40° to 150°F)
- Paintable casing to match mounting surface
- Wide magnet gap (up to 1.3") for yard gates, swimming pool access, or detached garages
- Battery life up to 5-years
- Two-way encrypted communication for enhanced security and reliability
- Supports external Normally Open or Normally Closed input
*Wireless range can vary depending on building materials
- Wireless Signal Range: 2 KM, open air (with EDGE Wireless Control Panel)
- Transmitter Frequency: 904MHz - 922MHz
- Supervisory Interval: 70 Minutes
- External Input: Accepts NC or NO dry contact devices
- Magnet Type: Rare Earth
- Magnet Gap: Up to 1.3 in
- Magnet Dimensions (L x W x H): 4.1" x 1.0" x 1.1" in (103 x 25 x 28 mm)
- Sensor Dimensions (L x W x H): 4.6" x 2.1" x 1.5" in (116 x 54 x 39 mm)
- Weight: 0.5 lbs (231 g)
- Housing Material: Paintable ABS Plastic
- Operating Temperature: -40° to150°F (-40° to 66°C)
- Relative Humidity : 0% to 100%, Non-condensing
- Batteries (Installed): One CR 123A 3V or equivalent Lithium Battery
- Projected Battery Life: 5 years
- Certification: FCC, IC, ETL, IP56
- Mount Sensors within range of the Control Panel: Although the transmitter may have a range of 2 KM (1.2 miles) open air, the sensor location can have a significant effect on range. In open/unobstructed situations, the transmitter range may be greater. In adverse wireless conditions, changing the sensor orientation may lead to improved range.
- Mount Sensors at Least 4.7 in (12 cm) Above the Ground: Placing sensors slightly above floor level helps to minimize possible sensor damage.
- Single vs. Double Door Installation: For single?door installation, mount the sensor on the door frame and the magnet on the door. For double?door installation, mount the sensor on the least?used door and the magnet on the most?used door.
- Do Not Expose Sensors to Moisture or Extreme Temperature: It is best to mount sensors in a dry location where the operating temperature do not exceed -40° to 150°F (-40° to 66°C).
- Keep Sensors and Magnets Away from Metal/Metallic Surfaces: To keep sensors and magnets away from metal or metallic surfaces (for example, foil wallpaper), it is recommended that you use spacers (not included). You should also avoid mounting sensors in areas where there is a large quantity of metal or electrical wiring (for example, near a furnace or in a utility room).
- Align Magnet with Sensor: Make sure the alignment arrow on the magnet points to the center alignment mark on the sensor.
- (1) Door/Window Contact
- (1) Rare Earth Magnet
- (2) Phillips Head Screws
- (1) CR 123A 3V or equivalent Lithium Battery
- (2) Adhesive Foam Tape
- 2GIG EDGE Panel (FW 1.3 or later is required)