Honeywell Home VISTA 20P Dual-Path Ethernet/Cellular Verizon LTE Hardwired Security System with High-Security Communicator (Powered by AlarmNet)
Honeywell VISTA 20P Kit Description:
The Honeywell VISTA20P-DP-LTE-HSV-SWAP is a VISTA 20P dual-path high-security system kit designed for multiple (internet/cellular Verizon LTE) alarm communications to the GeoArm central monitoring station. The VISTA 20P is a high-capacity, feature-rich, 48-zones control panel that delivers more value to the DiYer.
The VISTA 20P comes with 8 on-board hardwired zones (up to 15 with zone doubling), up to 40 hardwired zones with expansion (8 on-board zones + 32 expansion zones = 40 total hardwired zones), and up to 40 wireless expansion zones. Additionally, the VISTA 20P supports up to 16 wireless keyfobs, up to 48 user codes and up to 32 schedules. With the VISTA 20P panel you get remote programming capability, graphic keypad support and 2 partitions. The VISTA 20P's installation advantages, innovative end-user benefits and robust system capacity make the value-priced security system an ideal choice for higher-end DiY installations.
The VISTA 20P dual-path high-security system is backed by Honeywell's 2-year limited manufacturer's warranty and once upgraded with a Honeywell wireless alarm receiver is compatible with the full line of Honeywell 5800-Series wireless security products. GeoArm and Honeywell give you the options you need to fully customize your DiY high-security system.
Honeywell VISTA 20P Dual-Path Security System Applications:
- Homes
- Townhomes
- Apartments/Condos
- Offices
- Retail Spaces
- Small Businesses
- Warehouses
- Convenience Stores
- Gas Stations
- Churches
Security System Installation Notes:
When designing your system, keep in mind that the Honeywell VISTA 20P security system supports up to forty-eight (48) total zones with expansion modules but only supports eight (8) hardwired zones without expansion. You should add the Honeywell 4219 hardwired 8-zone expansion modules if you want to add more than eight (8) hardwired zones to your VISTA 20P security system. This VISTA 20P security system kit comes equipped to send its high-security alarm signals over the multiple internet IP or cellular Verizon LTE network(s). The Honeywell LTE-HSV dual-path alarm communicator sends your alarm signals over the primary internet communication path, and if down, over the backup cellular Verizon LTE communication path to the GeoArm central monitoring station.
With an AlarmNet alternative high-security communicator in place (such as the LTE-HSV), you would no longer need traditional phone service at the property to monitor your security system. The alternative communicator would also allow you to upgrade to GeoArm's Total Connect interactive alarm monitoring services, which enables you to receive important alerts, keep a close eye on your home and control your security system remotely via the internet and/or mobile devices you use each and every day. Isn't it time you got connected? Save money and take control of your business or home security with GeoArm.
*Please Note: Parts listed above require a subscription to Total Connect 2.0 powered by GeoArm.
Honeywell VISTA 20P Kit Documents:
• Data Sheet for Honeywell VISTA 20P Control Panel
• User Guide for Honeywell VISTA 20P Control Panel
• Quick Installation Guide for Honeywell VISTA 20P Control Panel
• Installation/Setup Guide for Honeywell VISTA 20P Control Panel
• Residential Sales Brochure for Honeywell VISTA-Series Control Panels
• Commercial Sales Brochure for Honeywell VISTA-Series Control Panels
• Comparison Chart for Honeywell VISTA-Series Control Panels
• Programming Guide for Honeywell VISTA 20P Control Panel
Honeywell VISTA 20P Kit Specifications:
•Alarm reporting and uploading/ downloading capability for Internet and Intranet use via 7847i, LTEM-XA, LTEM-XV, LTE-IV or LTE-HSV alarm communicators
•Supports four graphic touchscreen keypads
•Wireless keys can be programmed without using zones
•Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
-40 wireless expansion zones
-40 hardwire expansion zones
•Two low current on-board trigger outputs
•100 Event Log viewable at system keypads with time/date stamp
•48 system user codes assignable to either partition
•Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
•Two independent partitions plus a common partition
-Global Arming from any system keypad
-Go to function to view or operate one partition from the other
-Separate partition account numbers
•16 output devices
-Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
•Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
•Supports four-wire and up to 16 two-wire smokes
-Works with Sentrol CleanMe™ maintenance signal
•Multiple actions on output devices depending on system state
-Turns lights off when system arms
-Turns the same light on when system disarms
-Flashes same lights when system is in alarm
•Built-in phone line cut monitor with programmable delay and annunciation options
-Display on system keypads
-Trigger local sounders
-Trigger system bell
•Viewable on system keypads:
-Exit countdown
-Time and date display*
-Event log*
•Auto keypad backlighting on entry
•Keyswitch arming
•Programmable macro buttons and single-button arming
•Supports a variety of wireless remote controls for single-button operation
•VIP Module allows system control from any touchtone phone
•Chime by zone
•User Scheduling
-Latchkey reports to pagers
-Auto arm/disarm
-"User access" time windows
*Requires custom alpha keypad
Honeywell VISTA 20P Kit Videos:
Do-it-yourself (DiY) home security is emerging as a new trend in the security industry as advances in wireless security system technology have eliminated the need for costly professional on-site hardwired installations. GeoArm is the perfect partner for any home security DiYer considering installing a new wireless security system. With 30-years of professional security installation experience, GeoArm has the technical know-how to make your DIY home security installation as easy and seamless as possible. You can be confident that your DiY security system installation will be backed by a team of expert security professionals. We stand out from our competition by providing you with FREE security system programming with our alarm monitoring services (leave the technical process to the pro's), FREE remote technical support, and FREE do-it-yourself videos!
Once GeoArm receives your order for a VISTA 20P cellular security system, you will receive a confirmation email with a link to an easy VISTA 20P programming form where you will fill out your account information and zone descriptions. Once you have mounted and hardwired all your security devices, GeoArm's central alarm monitoring station will help you do a full system test to ensure your VISTA 20P alarm signals are being sent and received correctly.
Honeywell VISTA 20P Kit Includes:
(1) Honeywell VISTA 20P Alarm Control Panel
(1) Honeywell LTE-HSV High-Security Dual-Path Alarm Communicator (Internet IP/Cellular Verizon LTE)
(1) UltraTech IM-1250F1 Backup Alarm Battery (12V @ 5.0 Ah)
(1) AC Power Transformer (16.5VAC @ 40VA)
Miscellaneous: User Manual
▼ Compatible Hardwired Security Sensors ▼
▼ Compatible Honeywell Video Security Cameras ▼
List Price: $283.34
Your Price: $188.89
List Price: $25.72
Your Price: $17.15
