The Napco Prima PFOB is a remote 4-Button keyfob designed to provide convenient control over the Napco Prima wireless security system. The PFOB keyfob has a sleek design that makes it ideal for attaching to a keychain, ensuring that it is always within easy reach. The keyfob features four clearly labeled buttons, each serving a distinct function, allowing users to arm or disarm their security system, trigger a panic alarm, or control other customizable functions with just a simple press.
This keyfob is engineered with user convenience in mind, offering a straightforward interface that requires no technical expertise to operate. The buttons are designed to be responsive and durable, ensuring reliable performance over time. The Napco Prima PFOB is also equipped with a robust wireless communication protocol, ensuring that commands are transmitted quickly and securely encrypted to the security system, providing peace of mind to users.
In addition to its practical functionality, the Napco Prima PFOB is built to withstand everyday wear and tear. Its compact size and lightweight construction make it an unobtrusive addition to any keychain, while its sturdy build ensures it can handle the rigors of daily use. Whether you're at home or on the go, the Napco Prima PFOB Remote 4-Button Keyfob offers a convenient and reliable way to manage your Prima security system.
Product Features:
4-Button multifunction keyfob (for Arm Away, Arm Stay, Disarm and SOS)
Compact size
Long Range up to 820' open air
1-way encryption
Tamper supervised
Long battery life (Up to 7 years)
IPX7 weather resistance
Complies UL 1023
Includes keyring and CR2032 lithium coin cell battery
Use the Napco Prima Control Panel to Add and Setup the PFOB Keyfob: 1. Add the sensor to the panel. 2. Once added, test the sensor. Look at the Napco Prima panel, and then press Away/Stay. Notice that the panel begins to arm.
Note: Testing all 4-buttons with the GeoArm alarm monitoring station is strongly advised.
The PFOB keyfob requires a CR2032 battery. Once the battery is low, the Napco Prima panel displays a low battery icon next to the sensor in the devices list. The battery must be replaced within 7 days of the first low battery notification. If the battery is not replaced within 7 days, the sensor may not function properly. Warning, if an incompatible replacement battery is used, or the battery is installed incorrectly, explosion or damages may occur.
To Replace the Battery:
1. Verify that the Prima panel is not armed before changing the battery. 2. Flip the keyfob onto its face (buttons down), and locate the screw holding the casing together. 3. Use a screwdriver to loosen and remove the screw, setting it aside for resealing the sensor. 4. Slide a fingernail/fingertip into the keyfob's bottom slot (area with the keychain protruding), and then push the keyfob's back casing upward and away from the front of the keyfob. You can see the FCC label on the inside of the back casing. Note, the keychain will come lose in the process, be careful not to lose the keychain. 5. Hold the circuit board to the front casing. Note, Do not move the circuit board, if the board is moved it may result in improper button reporting. 6. Use a fingernail/fingertip to push the battery out of the casing, noting the polarity of the battery. 7. Slide a new CR2032 battery into the battery casing, making sure that the polarity is correct. 8. Place the keychain back onto the screw post, and then press the keyfob's backplate into place. 9. Place the screw into the screw hole, and then fasten the screw into the keyfob. 10. Test the keyfob.