ZW6HD-1RW - Leviton Z-Wave Plus Indoor 800-Series Decora Smart 600W Wall Switch
Leviton ZW6HD-1RW Product Description:
The Leviton ZW6HD-1RW is a Z-Wave Plus indoor 800-series smart dimmer. The ZW6HD-1RW Decora® dimmer is designed for use with modern Z-Wave hubs and makes it easier than ever to add smart lighting control to your home.
It is compatible with any Z-Wave enabled network, regardless of the manufacturer, and can also be used with other devices displaying the Z-Wave logo. Also, the ZW6HD-1RW acts as a repeater to help increase the reliability of the Z-Wave network.
This smart dimmer aesthetically matches Decora in-wall devices and features intuitive on/off and dim/bright control. Add the dimmer to a certified Z-Wave hub to enable app commands, scheduling, and voice control of connected lighting.
Product Features:
- Full range dimming - on/off and dim/bright control of dimmable LED and CFL, Incandescent/Halogen, and MLV lighting
- Remote access, voice command, and scheduling - as part of a Z-Wave smart home solution
- Easy Install - replaces your existing switch; wire leads and slim design make install a breeze
- Let there be light - double press the top rocker to quickly snap on at maximum brightness
- Lights won't glow when you turn the dimmer off - "Off Means Off" technology ensures low-wattage LED bulbs don't glow in the off state
- Single Pole or 3-Way - works with DD00R Wired Dimmer Companion or DD0SR Wired Switch Companion
- Change the color - using DDKIT swappable faceplates available in six colors (see ordering information)
- Create an elegant ambiance - set the mood for dinner, dim the lights to create a movie theatre experience, turn the lights down low to wind down for bedtime
- Know if lights are on and adjust them whether you're home, at work, or on vacation - control from anywhere using a compatible Z-Wave hub
- Personalize your lighting - customizable fade rates that gradually turn lighting on or off, or preset light level options to make sure lights always come on at the level you want
- Use your voice for control without lifting a finger - using a compatible Z-Wave hub
- Prevent flickering lights - designed for compatibility with dimmable LED bulbs and fixtures with settings to fine-tune performance
- Control this dimmer from another wall location in your home - pairs with DD00R or DD0SR Wired Dimmer or Switch Companions
- Increase the reliability of your Z-Wave network - acts as a repeater to strengthen your Z-Wave Mesh network
Leviton ZW6HD-1RW Product Specifications:
Dimensions (L x W x D):
- 4.13" x 1.73" x 1.30"
Tech Specs:
- Neutral wire required for installation
- Z-Wave Plus Network - 908.40, 908.42, 916.00 MHz
- Z-Wave Range - 50 feet to the hub or another Z-Wave enabled repeater
Ratings:
- General Use - 120VAC, 60Hz
- LED - 300W
- CFL - 300W
- Incandescent/Halogen - 600W
- Magnetic Low Voltage - 600VA
- Operating Temperature - 32° - 104°F (0° - 40°C)
- Operating Humidity - 10% to 90% non-condensing
Agency Standards and Compliance:
- Incandescent - 300W - 120VAC, 60Hz
- LED/CFL - 100W - 120VAC, 60Hz
Agency Standards and Compliance:
- Complies with UL1472; CSA C22.2 No. 184-15, 184.1-15
- CSA Certified for USA and Canada
- Z-Wave Plus v2 Certified
- Complies with FCC Part 15, Class B
- FCC ID - QGH-ZW6HD
- IC - 2473A-ZW6HD
Warranty Information:
- Two-Year Limited Warranty
Z-Wave Plus V2 Certified (800 Series):
- Supports Z-Wave 8th generation mesh wireless for control of connected lighting with certified Z-Wave hubs
- Compatible with any Z-Wave enabled network; works with other devices displaying the Z-Wave logo; backwards compatible with all generations of Z-Wave devices
- Meets the Z-Wave specification for the latest in speed, performance, and security
- Supports SmartStart enrollment when used with a Z-Wave controller that supports SmartStart inclusion. Also supports Network wide inclusion, and Classic inclusion enrollment methods
- Supports S2 Security and Z-Wave Over-the-Air updates
- Reference the Getting Started Guide for installation instructions and Advanced Options that can be configured over the Z-Wave network as well as a list of supported Z-Wave associations and classes
Tech Specs:
- Neutral wire required for installation
- Z-Wave Plus Network - 908.40, 908.42, 916.00 MHz
- Z-Wave Range - 50 feet to the hub or another Z-Wave enabled repeater
Wired 3-Way/Multi-Location Control:
The Decora Smart Z-Wave Plus Dimmer can be paired with a DD00R Dimmer Companion or a DD0SR Switch Companion to control the lights from more than one location.
