The DSC Alarm.com TL880LECAT N is a dual-path internet/cellular AT&T LTE alarm communicator that is compatible with the DSC PowerSeries Neo and PowerSeries Pro control panels. The TL880LECAT N ensures reliable primary or back up alarm communication's for new and existing DSC Neo/Pro security systems.
When the TL880LECAT N is connected to the PC-Link connector of the DSC Neo or Pro control panels, the alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN), if so desired, plus the cellular AT&T LTE network and internet for increased redundancy to the GeoArm central monitoring station. It conveniently utilizes the cellular network and Internet as back-up to ensure high speed, reliable and secure alarm communications to alleviate any concerns about the possibility of phone line disruption. Also, the TL880LECAT N can serve as a primary communicator in locations where there is no traditional phone line. Having the internet and LTE in the same module means as the industry moves away from traditional phone lines, DIYer's can continue to rely on redundant transmission methods.
With 128-bit AES encryption of the alarm signal, central stations, and DIYer's can be assured that this is the most secure alarm communicator offered. And with programmable (by seconds) supervision heartbeats, the TL880LECAT N communicator's availability is fully monitored. The TL880LECAT N offers full data reporting and remote management which saves time and reduces the maintenance costs. With the use of DSC's DLS5 Downloading Software, you can remotely program and configure the control panel, change user information, retrieve historical records, generate the status reports and maintenance details from a PC via the cellular or internet connection. Also, the TL880LECAT N can be used as a fundamental tool to deliver visual verification to reduce the high costs that can be incurred by false alarms and unnecessary site-checks.
As more and more homes or businesses move away from traditional phone lines, towards VoIP (Voice over IP) or mobile phones, alternate delivery methods for alarm communication must be explored for security systems. The TL880LECAT N conveniently utilizes the cellular network to reduce the need for dedicated phone lines and/or the impact of phone line interruption. The TL880LECAT N is an ideal solution for both residential and small to medium business environments.
Product Features:
Dual-path (LTE/Internet) for flexibility and redundancy
Alarm.com interactive services allow Z-Wave sensors, remote arm/disarm and other functions from web portal or smartphone application
Signal strength and trouble display
PC-Link connection
Remote mount up to 15.2m (50') from the alarm panel using the 4-wire connection
Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
128-bit AES encryption via cellular and internet
Back up or primary cellular alarm communication and ethernet
Remote firmware upgrade capability via cellular or Internet using Alarm.com management portal
Full event reporting to GeoArm central station
Cellular periodic test transmission
Integrated call routing
Panel remote uploading/downloading support via cellular or internet
PC-Link connection
Programmable labels
SIA and Contact ID (CID) formats supported
Signal strength and trouble display LEDs
Subscriber Identity Module (SIM) card included with communicator
Supervision heartbeats over Ethernet path or over the Cellular path, when the Ethernet path is known to be in a trouble condition
2-way audio capable when used with audio module HSM2955(R)
DSC PowerSeries Neo Compatible (HS2016/ HS2032/HS2064/ HS2128 control panels)
DSC PowerSeries Pro Compatible (HS3032/ HS3128/3248 control panels)