Please Note: The DSC TBZ48D thermostat module has been discontinued.
The DSC TBZ48D is a battery-powered Z-Wave wireless smart thermostat that is compatible with Z-Wave security control panels. The TBZ48D digital thermostat is designed to control the majority of HVAC systems. The TBZ48 contains a robust thermostat interface and is designed for use with communicating systems where remote monitoring and/or remote control are desired.
The TBZ48D can be operated by battery power or 24VAC. Please note, if the thermostat is installed on a Z-Wave network while it is battery powered, it will operate as Z-Wave FLiRS endpoint device. If it is installed on a Z-Wave network when it is 24 VAC powered, it operates as an always-on Z-Wave routing device.
Product Features:
- Fixed Format Display with white backlight
- Heating and Cooling Setpoint display option
- System Mode (Off, Heat, Cool, Auto, E-Heat)
- Fan Mode display and control (Auto, On)
- On-screen setup of HVAC Type, Fan Type, Changeover type for HP systems, F/C mode and sensor calibration
- NEW Battery Powered Design - No 'C' Wire Required
- Runs on 2 or 4 - AA Cells OR Standard HVAC 24VAC
- Extremely Long Life - 2 Years on 4 - AA Alkaline
- Front Loading Battery Compartment
- Z-Wave Compatible - Version 4.5.4
- Supports Z-Wave FLiRS Functionality
- USB Firmware Upgradeability
- Standard or Heat Pump HVAC Systems
- Fixed Format Display with 7 Letter Message Bar
- Remote Control of All Thermostat Functions
- Wall mount or mounts on single-gang junction box
- Backed by DSC's 1-year limited manufacturer's warranty
Please Note: For installation of the DSC TBZ48D smart thermostat, you should have knowledge of your high-voltage HVAC system. If not, we recommend you hire an HVAC technician to install on your behalf due to the risk of injury to a non-professional. GeoArm will not troubleshoot wiring and power issues without an HVAC Technician present.
- Dimensions (L x W x D): 5.75"x 4.5" x 1" in.
- Wiring: Uses standard thermostat connections (C, RC, RH, W1,W2/O, Y1, Y2, G) - 18 AWG
- Power: Battery or 24VAC Powered: 2 AA or 4 AA cells
Note: 24V operation requires both 24VAC (R) and 24VAC common (C) wires from the HVAC System
- Compliance: FCC Compliant to CFR47, Part 15B (United States); Industry Canada RSS 210, Issue 8 (Canada)
- Battery or 24V AC powered - Compatible with vast majority of Central HVAC systems
- Central HVAC systems or separate heating/cooling systems with separate RH/RC transformers (split)
- Standard gas/electric HVAC Systems: 2-stage heating, 2-stage cooling
- Heat Pump HVAC Systems: 3-stage heating, 2-stage cooling
- Fan system: Selectable for gas or electric heat systems
- Heat Pump Change Over valve (reversing valve): Selectable for change over with heat or change over with cool (O or B output)
- Emergency Heat: In Heat pump mode, Emergency Heat mode is selectable from the thermostat
- Compressor short cycle protection delay of 5 minutes (adjustable)
- Automatic heating and cooling changeover when in Auto Mode