PROTAKEOVER - Resideo Honeywell Home ProSeries Wireless Takeover Module (for Multiple Sensor Protocols 319.5/345/433 MHz)
ProSeries PROTAKEOVER Product Description:
The Resideo Honeywell Home PROTAKEOVER is a single, simple plug-in wireless takeover module that enables ProSeries panels to communicate with multiple wireless security sensor protocols. The PROTAKEOVER module is compatible with the ProSeries PROA7, ProSeries PROA7C, ProSeries Canada PROA7CN, ProSeries PROA7PLUS, ProSeries PROA7PLUSC or ProSeries Canada PROA7PLUSCN all-in-one wireless touchscreen control panels.
The PROTAKEOVER allows PRO-Series control panels the ability to communicate with previously installed wireless sensors and modules that transmit on the 319.5 MHz, 345 MHz, 433.92 MHz and 433.92MHz frequencies. The takeover module connects directly to the control panel and is powered via the control panel's connection. This module should not be used with life safety sensors such as Smoke, Heat or CO detectors.
When installing the PROTAKEOVER, please remember to ensure that all electrical power is removed from the control panel prior to installation. Unplug the power supply and disconnect the backup battery.
Product Features:
- Easy plug-in installation and enrollment
- Protocols supported include 5800-Series, 2GIG, DSC (North America), ITI and BOSCH
- Diversity antennas for increased coverage located in the All-in-One panel back plate
- Power supply regulation on board - module is powered from the panel and is supported by the back-up battery should AC loss occur
- Protocol selection is based on a single rotary switch
- Backed by Honeywell's 2-year limited manufacturer's warranty
ProSeries PROTAKEOVER Product Documents:
• ProSeries PROTAKEOVER Wireless Takeover Module - Data Sheet
• ProSeries PROTAKEOVER Wireless Takeover Module - Installation and Setup Guide
• ProSeries PROTAKEOVER Wireless Takeover Module - Transmitter Compatibility Chart
ProSeries PROTAKEOVER Product Specifications:
- Dimensions (L x W): 2.8" x 1.2" (71mm x 30mm)
- Compatibility: All ProSeries control panels
- RF Frequency: 319.5 MHz, 345 MHz and 433 MHz
- Power Requirements: 5VDC
- Battery Backup: Yes (panel)
- Operating Temperature: 32° to 122°F (0° to 50°C)
- Relative Humidity: 95% max., non-condensing
- Agency Approvals: FCC/IC, ETL US Listed to UL 1023 and UL 1610, cETL Listed to ULC C1023
- Authorized Countries: US, Canada, Latin America
ProSeries PROTAKEOVER Sensors List:
Resideo
- 5814 - Window Ultra Small
- 5815 - Door/Window Transmitter
- 5815WG - Wide-Gap Door/Window Transmitter
- 5816 - Door/Window Transmitter
- 5816OD - Outdoor Door/Window Transmitter
- 5817XT - Three Point Wireless Transmitter
- 5817CBXT - Three Zone Commercial Fire/Burg Transmitter
- 5818MNL - Door Recessed
- 5819S - Wireless Shock Sensor
- 5820L - Slim-Line Transmitter
- 5821 - Flood Detector
- 5822T - Tilt Sensor
- 5853 - Glass Break Detector
- 5869 - Wireless Hold-Up Switch
- 5898 - DUAL TEC Motion Sensor
- 5800PIR-OD - Wireless Outdoor Motion Sensor
- 5800PIR-RES - Wireless Motion Detector Residential
- 5800PIR-COM - Passive Intrared Motion Sensor Commercial
DSC
- WS4945 - Door/Window Sensor
- EV-DW4917 - Door/Window Sensor
- WS4985 - Wireless Flood Detector
- WLS914 - Wireless Pet-Immune Passive Infrared Detector
- EV-DW4975 - Door/Window Sensor
- WLS922L - Wireless Glassbreak Detector
- WS4904 - Wireless Passive Infrared Detector
- DW4927SS - Wireless Shock Sensor with Built-In Door/Window Contact
2GIG
- 2GIG-DW20R-345 - Recessed Door/Window Contact
- 2GIG-DW10-345 - Thin Door/Window Contact
- 2GIG-TILT1-345 - Tilt Sensor
- 2GIG-FT1-345 - Flood and Temperature Sensor
- 2GIG-GB1-345 - Wireless Glassbreak Detector
- 2GIG-PIR1-345 - Passive Infrared Motion Detector
GE Interlogix ITI
- TX-E201 - Door/Window Sensor
- TX-E221 - Door/Window Sensor
- TX-E401 - Tilt Sensor
- TX-E611 - Flood and Freeze Sensor
- 60-362N-10-319.5 - Door/Window Sensor
Bosch
- Radion RFDW-SM-A - Surface Mount Door/Window Sensor
- Radion RFUN-A - Radion Universal Transmitter
