The Napco Prima PPIR is a wireless encrypted pet-immune motion detector tailor-made for households and businesses that require reliable motion detection without the hassle of false alarms triggered by pets. This wireless motion sensor is specifically designed to be compatible with the Napco Prima security system, ensuring seamless integration and enhanced security coverage. With a detection range of 32.8 feet, the PPIR is capable of monitoring a substantial area, making it ideal for larger rooms or open spaces.
The PPIR motion detector has an adjustable 33 to 55 lbs. pet immunity sensitivity level, and it is designed to fit seamlessly in the corner of any room. When the passive-infrared sensor detects movement, the PPIR then transmits an alarm notification signal to the Napco Prima control panel (PP1A/PP1V), end-user, and/or GeoArm central monitoring station informing everyone selected of an alarm initiating event.
One of the standout features of the Napco Prima PPIR is its pet-immune technology. This allows the detector to differentiate between human intruders and pets, such as cats or small dogs, reducing the likelihood of false alarms. This is particularly beneficial for pet owners who want to maintain a secure environment without the inconvenience of frequent false alerts. The device uses advanced algorithms to analyze motion patterns, ensuring that only genuine threats are detected and reported to the security system.
In addition to its pet-immune capabilities, the PPIR is equipped with wireless encrypted communication, providing a secure and reliable connection to the Napco Prima security system. This encryption ensures that the signals transmitted between the detector and the control panel are protected from potential interference or hacking attempts. The sleek and unobtrusive design of the PPIR allows it to blend seamlessly into any environment, maintaining the aesthetic of the space while providing robust security coverage. Overall, the Napco Prima PPIR Wireless Encrypted Pet-Immune Motion Detector is an excellent choice for those seeking a dependable and intelligent security solution.
Product Features:
433 MHz Window/Door Transmitter
Detection Range up to 32.8 ft. (10m)
Low & High Sensitivity Modes
Adjustable Pet Immunity (from 33 to 55 lbs.)
Long Range up to 820' Open Air
1-Way Encryption
Tamper Supervised
Long Battery Life (Up to 5 years)
Includes CR123A Lithium Battery 3V
Self-Stick Tape and/or optional screws for mounting
The Napco PPIR motion sensor can be installed using the provided adhesive and/or screws. We recommend using the provided screws for installation. This method is more secure than using adhseive alone.
Please Note - Add the motion detector to the Napco Prima control panel before installation.
Important Safety Instructions:
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
When there is a low battery, replace with a compatible lithium ion battery.
To install the motion detector:
1. Select the desired position for the sensor. The sensor detects motion within 3.28 ft (1m) in front of it installed at 6.88 ft (2.1m) having a range of 32.80 ft (10m).
2. Remove the sensor's battery pull tab.
3. Adhere the sensor to the wall using the provided screws and/or adhesive. We recommend using the provided screws for installation. This method is more secure than using adhesive.
Using Screws
a. Locate the bottom of the sensor (the slotted short end), and then use a screwdriver to remove the casing's screw.
b. Gently slide a fingernail/fingertip into the slot and push the top casing of the sensor upward. (You can see the FCC label on the inside of sensor casing.)
c. Remove the adhesive film cover and then place the back plate against the wall, making sure that the orientation is correct for the desired position. Note, once placed the sensor cannot be moved without damaging the adhesive. (Optional)
d. Insert the included mounting screw into the screw breakaway screw hole, using a screwdriver to fully secure the backplate to the wall.
e. Before finishing installation, set the PINs and jumpers to the desired position.
f. Once the sensor is configured as desired, press the sensor cover against the base, until there is an audible snap.
g. Use the sensor's casing screw to secure the cover.
Using Adhesive
a. Locate the bottom of the sensor (the slotted flat end), and then use a screwdriver to remove the casing's screw.
b. Gently slide a fingernail/fingertip into the slot and push the top casing of the sensor upward.
c. Set the PINs and jumpers to the desired position.
d. Once the sensor is configured as desired, press the sensor cover against the base, until there is an audible snap.
e. Use the sensor's casing screw to secure the cover.
f. Peel the film cover off the adhesive, and then firmly press the sensor back plate against the wall. Once placed the sensor cannot be moved without damaging the adhesive.
h. Remove the adhesive film cover, and then place the back plate against the wall, making sure that the orientation is correct for the desired position. Note, once placed the sensor cannot be moved without damaging the adhesive.
i. Insert the included mounting screw into the screw breakaway screw hole, using a screwdriver to fully secure the backplate to the wall.
j. Before finishing installation, set the PINs and jumpers to the desired position.
k. Once the sensor is configured as desired, press the sensor cover against the base, until there is an audible snap.
l. Use the sensor's casing screw to secure the cover.
4. Add the sensor to the Prima control panel, by putting the panel in learn mode. Then press the button on the side of the sensor to pair the sensor to the panel.
5. Once added, test the sensor. Look at the Prima panel, and then open the door/window. Notice that the added sensor displays faulted.
Please Note: Testing all sensors to the GeoArm alarm monitoring station is strongly advised.
The Napco PPIR motion detector requires a CR123A battery. Once the battery is low, the Napco Prima panel displays a low battery icon next to the sensor in the devices list. The battery must be replaced within 7 days of the first low battery notification. If the battery is not replaced within 7 days, the sensor may not function property.
To Replace the Battery:
1. Locate the bottom of the sensor (the slotted flat end), and then use a screwdriver to remove the casing's screw.
2. Gently slide a fingernail/fingertip into the slot and push the top casing of the sensor outward, away from the wall.
3. Use a fingernail/fingertip to push the battery out of the casing, noting the polarity of the battery.
4. Insert a new CR123A battery into the battery casing, making sure that the polarity is correct.
5. Press the sensor cover back onto its back plate. There will be an audible snap.
6. Use the sensor's casing screw to secure the cover.
7. Test the sensor.
Warning: If an incompatible replacement battery is used, or the battery is installed incorrectly explosion or damages may occur.
The PPIR Motion Sensor has 2 sets of adjustable pins. The pins adjust the Pet Immunity setting and the Sensivity level. Each set of pins has 2 settings that can be selected.
Pin Configuration:
Top and middle pin - Pet Immunity (up to 33lb dog), Sensitivity Low - max of 19ft (6m) distance range
Middle and bottom pin - Pet Immunity (up to 55lb dog), Sensitivity Low - max of 32ft (10m) distance range
The Napco PPIR Motion Sensor has pet immunity pins that allow the user to select the desired immunity level. Place the selector over the desired pin configuration.
To change the pet immunity level:
1. Remove the back plate from the motion sensor.
2. Turn the sensor over so the battery faces up.
3. Locate the pet immunity pins on the left side.
4. Gently pinch the jumper and pull upward and away from the sensor. All 3 pins are then visible.
5. Gently press the jumper on the desired pin set.
6. Replace the sensor plate, and then continue to installation.
or
Adjust the sensitivity level, and then continue to installation.
The Napco PPIR Motion Sensor has sensitivity pins that allow the user to select the desired sensitivity level. Place the selector over the desired pin configuration.
To change the sensitivity level:
1. Remove the back plate from the motion sensor.
2. Turn the sensor over so the battery faces up.
3. Locate the sensitivity pins on the right side.
4. Gently pinch the jumper and pull upward and away from the sensor. All 3 pins are then visible.
5. Gently press the jumper on the desired pin set.
6. Replace the sensor plate, and then continue to installation.
or
Adjust the pet immunity level, and then continue to installation.
