COSMO-4W - Honeywell System Sensor i4 Hardwired 4-Wire Smoke and Carbon Monoxide Detector
Honeywell Home COSMO-4W Product Description:
The Honeywell System Sensor COSMO-4W is a i4-Series combination, four-wire, photoelectric carbon monoxide (CO) and smoke detector. The COSMO4W features the best-in-class dual-combination CO and smoke detection technology in a single, system-connected device.
The COSMO-4W i4-Series combines CO and smoke detection into one device, requiring less wiring and fewer back boxes than two separate devices. The i4-Series is compatible with i3 (2WTA-B or 4WTA-B), so an attractive CO monitoring solution can easily be retrofitted into existing i3 installations. The i4-Series CO cell can be easily replaced at end-of-life, resulting in a much lower life cost than having to replace the entire detector.
The COSMO-4W i4-Series Combination CO/Smoke detector requires less wiring than two separate CO and smoke devices. DIYer's can pre-wire its plug-in base, while its large wire-entry port and in-line terminals provide ample room for neatly routing wiring. The base accommodates several back box options and also direct mounts using drywall anchors. The i4 head plugs into the base with a simple Stop-Drop 'N Lock™ action. When the detector's CO cell reaches end-of-life, it can be easily replaced in the field without a tool.
With the help of the module, the COSMO-4W i4-Series transmits distinct CO and smoke signals, allowing appropriate response from the central monitoring station. Intelligent features, such as drift compensation and smoothing algorithms, reduce nuisance alarms.The COSMO4W LED's enable instant inspection of detector status signaling normal/standby condition, alarm condition, maintenance/trouble condition or functional test mode. 2-wire devices allow loop testing via the EZ Walk feature where wiring can easily be verified by checking the LED status at each detector.
Smoke sensitivity can be easily measured using the wireless SENS-RDR device. CO cell functionality can also be quickly validated in the field with canned CO per NFPA 720: 2009 requirements using the detector's RealTest functionality.
Product Features:
- Single device for CO and smoke detection that uses less wiring and fewer junction boxes
- Compatible with a wide range of control panels with the use of the required i4 Interface Module
- Sends distinct smoke and CO signals to the panel
- Sounds Temporal 3 for smoke and Temporal 4 for CO
- Built-in 85dB sounder
- LEDs display both CO and smoke status
- External IR LED provides extended range sensitivity testing
- Versatile mounting allows for wall or ceiling placement
- Easily replaceable electrochemical CO cell with 6-year end-of-life timer that signals the panel and chirps to alert the homeowner
- RealTest® enables functional test using canned CO
- Drift compensation and smoothing algorithms provide false alarm immunity
- Compatible with SENS-RDR sensitivity tester
- Full agency compliance with UL 268 and UL 2075
Honeywell Home COSMO-4W Product Documents:
• Data Sheet for Honeywell CO/Smoke Detector (COSMO-4W)
• Brochure for Honeywell CO/Smoke Detector (COSMO-4W)
• Installation Guide for Honeywell CO/Smoke Detector (COSMO-4W)
Honeywell Home COSMO-4W Product Specifications:
- Dimensions: Diameter: 5.5"; Depth: 2.5" (includes base)
- Operating Temperature Range: 32°F to 122°F (0°C to 50°C)
- Storage Temperature Range: -10 to 70° C (14 to 158° F)
- Operating Relative Humidity: 20-95% RH
- Operating Voltage: Nominal: 12/24V non-polarized | Minimum: 8.5V | Maximum: 35V
- Maximum Standby Current: 50 µA
- Maximum Alarm Current: 2-Wire 50mA; 4-Wire 40mA
- Audible Signal: 85 dBA
- Maximum Reverse Polarity Current: 20 mA
- Maximum Start-up Current: 200µA
- Maximum Start-up Capacitance: 10 µF
- Weight: 9.2 oz. (261 g)
- Sensitivity: 2.5%/ft nominal
- Input Terminals: 14 to 22 AWG
- Mounting: 3½-inch octagonal back box | 4-inch octagonal back box | Single-gang back box | 4-inch square back box with a plaster ring | Direct mount to ceiling
Product Reviews
Love this product, May 16, 2023
Posted By: Sydney D
3 people found this review helpful
This was perfect. I had an previous sensor that I replaced so installing it was very smooth with the existing wires in place. I was really worried about CO poisoning and that my grandparents might leave the Gas on the stove so this very much makes me feel a lot safer at home.
3 people found this review helpful
This was perfect. I had an previous sensor that I replaced so installing it was very smooth with the existing wires in place. I was really worried about CO poisoning and that my grandparents might leave the Gas on the stove so this very much makes me feel a lot safer at home.
Combo - Smoke & CO Detector ALL in One, May 11, 2022
Posted By: Anton Sonntag
10 people found this review helpful
It is very easy to install because it easily fits into the already existing frame from my previous version. These will last for about five years before they will need to be replaced due to the extremely loud and nerve-damaging chirping, all in all, good product.
10 people found this review helpful
It is very easy to install because it easily fits into the already existing frame from my previous version. These will last for about five years before they will need to be replaced due to the extremely loud and nerve-damaging chirping, all in all, good product.
Great Value & Product - A Must for Each House, April 1, 2022
Posted By: BRENT
9 people found this review helpful
This product was very easy to install. We are renovating our house. So we had existing detectors already installed. The hardwire was already attached and the new detector plug was easily connected to the existing plug. Also, the base was exactly the same size as the old ones that fit in the same spot, and knowing the Alarm sound is very Loud. Happy customer.
9 people found this review helpful
This product was very easy to install. We are renovating our house. So we had existing detectors already installed. The hardwire was already attached and the new detector plug was easily connected to the existing plug. Also, the base was exactly the same size as the old ones that fit in the same spot, and knowing the Alarm sound is very Loud. Happy customer.
Excellent product and customer service, December 16, 2021
Posted By: richard
11 people found this review helpful
I bought this because it is not only excellent but most of all their customer service as well. I had a problem with one of my smoke/carbon monoxide detectors and I called customer service not because I want an exchange or anything else because I know I've passed the time frame for that but to merely ask for technical advice. Excellent customer service always keeps customers coming back...
11 people found this review helpful
I bought this because it is not only excellent but most of all their customer service as well. I had a problem with one of my smoke/carbon monoxide detectors and I called customer service not because I want an exchange or anything else because I know I've passed the time frame for that but to merely ask for technical advice. Excellent customer service always keeps customers coming back...
