ADC-BOS-BC23-GE - Alarm.com Bed System Sensor (w/Interlogix and Qolsys Transmitter)
Alarm.com ADC-BOS-BC23-GE Product Description:
The Alarm.com ADC-BOS-BC23-GE is bed sensor system with Interlogix/Qolsys trasmitter for secure independant homecare and senior living. The ADC-BOS-BC23-GE is intelligent enough to monitor overall quality of life and provides a critical safety net. Using discreet wireless sensors throughout the client's living area, the Alarm.com wellness suite of products grants caregivers real-time insight into each client's current conditions as well as potential emergency problems.
With the ADC-BOS-BC23-GE you are kept alert through automated phone calls, text messages, emails, and access to a securte web portal. It utilizes customized trend analysis and early detection of changes in Activities of Daily Living (ADLs) to give providers evidence-based data to support changes in levels of care, while enabling individualized support across the care continuum. Unlike emergency pendants, the ADC-BOS-BC23-GE reports changes in sleeping and eating patterns, bathroom visit frequency and medication adherence.
The solution connects Interlogix/Qolsys security sensors, lights, locks, thermostats and video, as well as bed sensors, alert buttons and sensors for medicine cabinets and refrigerators, enabling discreet but comprehensive monitoring of the home. Wellness is also compatible with the latest in hands-free voice control. With Amazon Echo and Google Home, it's easy and simple to control things around the home. Wellness' multi-unit management service can also help professional caregivers and community staff operate more efficiently. Data-driven insights keep the staff better informed of residents' immediate needs, and enable them to make custom recommendations that match the right level of care to each resident's long-term needs.
Wellness Monitoring:
- Nightime Falls
- Sleep Patterns & Sleeplessness
- Sedentary Lifestyles or Wandering
- Odd & Erratic Eating Habits
- Infrequent or Excessive Bathroom Activities
- Medication Adherence
Alarm.com ADC-BOS-BC23-GE Product Documents:
• Datasheet for Alarm.com Bed Sensor System with Interlogix Transmitter (ADC-BOS-BC23-GE)
• Datasheet for Alarm.com Bed Sensor System with Qolsys Transmitter (ADC-BOS-BC23-GE)
Alarm.com ADC-BOS-BC23-GE Product Specifications:
- Mat Dimensions (L x W x D): 30 x 11 x 0.3 in.
- Cable: Gray, 18in, 26 AWG, 4 conductor sheathed, terminated with RJ9 connector
- Electronic Enclosure: White, 3.5 in. x 2.5 in. x 0.8 in. ABS plastic
- Electronic Signaling: Battery-powered filter circuit with integrated 319.5 MHz (crystal-controlled) Interlogix/Qolsys-compatible transmitter with 64 minute supervisory interval
- Activation Weight: Minimum 50 lb. subject directly above mat
- Sensing Interface: Filtered, normally open (i.e. when not occupied), momentary contact switch
- Compatibility: Interlogix Simon XT/XTi/XTi-5 and Qolsys
- Material Life: Typically 2 years
Alarm.com ADC-BOS-BC23-GE Product Programming:
- Use the Alarm.com AirFX Add a Sensor interface or the panel interface to add the bed sensor to the account. Set the New Sensor Information as shown in the chart to the right. For enrolling the sensor at the panel, the sensor can be tampered by pressing and holding the red button on the transmitter box for 5 seconds, until the red LED illuminates, and then releasing the button. Please note that a sensor in group 40 may sound a special chime if the option is turned on. In most cases, the panel will default the special chime to off. Refer to the panel instructions to ensure that the special chime is turned off if you do not wish for the chime to sound when the bed is vacated. In special cases where turning off the special chime functionality is not desired, the bed sensor can be learned into group 27, however this is not the optimal configuration.
- After the sensor is added to the system, change the sensor type to Occupancy by doing the following: From the Equipment page of the Dealer Website click Change to the right of the sensor's name. Select the Change Sensor Type action, and update the new sensor type to Occupancy.
Sensor ID Select an unused ID
Group 40
Sensor Name Any
DL Code Inside the battery compartment of the transmitter
Alarm.com ADC-BOS-BC23-GE Product Installation:
- Locate the sensor within 100 feet of the base station.
- Place the sensor on top of a mattress and below the sheets with the dark blue side facing up. The sensor should be positioned directly under the hip area when an individual is lying down. The sensor should be placed horizontally across the bed. It is recommended that the bed sensor is placed under a thin mattress pad to improve comfort.
- Tuck the transmitter and any excess cable between the mattress and box spring.
- To test the bed sensor, apply weight directly above the mat for several seconds and release. View the Event History page on the Dealer Website to confirm the sensor activity.
