Please Note: The Interlogix TX-E721 wireless indoor pet-immune PIR motion detector alarm contact has been discontinued without replacement.
The GE Interlogix TX-E721 is a indoor, battery-operated, wireless, pet-immune PIR motion detector. The TX-E721 motion detector is compatible for use with GE Interlogix control panels and wireless receivers. Featuring advanced signal processing, the TX-E721 detection device is capable of eliminating false alarms caused by pets weighing up to 40 pounds.
Well suited for both homes and small to mid-sized businesses, the TX-E721 motion detector identifies the movement of a person within a specific area by sensing the infrared energy emitted from a body as it moves across the sensor's field of view. When this motion is detected, the sensor transmits an alarm signal to the GE Interlogix control panel.
Product Features:
- 35 ft. x 40 ft. detection coverage with selectable sensitivity
- Pet immunity signal processing prevents false alarms for homeowners with pets weighing up to 40 lbs.
- 5-year battery life with an easily replaceable CR-123 battery
- Low battery reporting indicates when batteries need replacing before they expire
- Cover tamper switch detects potential disablement or damage to a sensor by an intruder
- Fully supervised device sends signal every 64 minutes to the security panel to ensure uninterrupted performance
- ETL Listed
- Dimensions (W x D x H): 2.5 x 2.1 x 3.0 in. (6.4 x 5.3 x 7.6cm)
- Compatibility: GE Interlogix 319.5MHz control panels/receivers
- Transmitter Frequency: 319.5MHz (Crystal based)
- Battery Type: CR123A
- Typical Battery Life: Up to 5 years at 68°F (20°C)
- Operating Temperature: 32°F to 110°F (0°C to 43°C) non-pet applications; 60°F to 110°F (16°C to 43°C) pet applications
- Storage Temperature: 30°F to 140°F (-34°C to 60°C)
- Humidity: 0-90% (non-condensing)
- Color: White
- Supervisory Signal Interval: 64 min (approximately)
- Approvals: FCC/IC
- Temporarily place the sensor in its intended mounting location. Program and final test the sensor before permanently mounting it.
- If possible, locate sensors within 100 ft. (30.5 m) of the panel. While a transmitter may have a range of 500 ft. (152 m) or more out in the open, the environment at the installation site can have a significant effect on transmitter range. Sometimes a change in sensor location can help overcome adverse wireless conditions.
- The recommended mounting height is 7 1/2 ft.
- Position the sensor to protect an area where an intruder would be most likely to walk across the detection pattern.
- Mount the motion sensor on a rigid surface which is free from vibrations.
- Do not mount the sensor near duct work or other large metallic surfaces which may affect the RF signals. Actual acceptable transmitter range should be verified for each installation.
- Mount the sensor permanently on a flat wall or in a corner. Do not set it on a shelf.
- Windows should be closed in any area which has an armed motion sensor.
- The sensor must be incline-mounted at a mounting height of 7.5 ft.