TH6320ZW2003/U - Resideo Honeywell Home T6 Pro Z-Wave Plus Smart Thermostat
Please Note: The Honeywell Home TH6320ZW2003/U T6 Pro Z-Wave Plus smart thermostat has been discontinued and replaced by the TH6230ZW2007/U model number.
The Honeywell Home TH6320ZW2003/U T6 Pro Z-Wave Plus Smart Thermostat is capable of controlling up to three heat and two cool stages of heat pump, (including dual fuel heat pump systems) and up to two heat and two cool stages of conventional system (3H/2C HP, 2H/2C Conv.) It also measures, displays and reports % indoor relative humidity; however, this model does not control humidification equipment.
The Honeywell TH6320ZW2003 is programmable thermostat that is most commonly used with Honeywell Lyric Controller and ProSeries alarm control panels. With this programming thermostat you can control your temperature from anywhere using your Android, BlackBerry or iPhone device. It is one of the easiest smart thermostats to install and is controllable by all Z-Wave compliant controllers that have the control capability for "Thermostat" devices. When integrated with the app that controls your Z-Wave controller, it lets you program and control your home's HVAC system as well as controlling other Z-Wave devices connected to the same Z-Wave controller.
Because the thermostat is battery-powered, low-voltage integrators can easily connect the thermostat to most HVAC systems. Optional 24 VAC powering via "C" or common wire is also available, if desired.
Product Includes:
T6 PRO Z-Wave Thermostat
UWP™ Mounting System
Honeywell Standard Installation Adapter (J-box adapter)
Please Note: For installation of the Honeywell T6 Pro smart thermostat, you should have knowledge of your high-voltage HVAC system. If not, we recommend you hire an HVAC technician to install on your behalf due to the risk of injury to a non-professional. GeoArm will not troubleshoot wiring and power issues without an HVAC Technician present.
Z-Wave Radio:
Frequency (USA and Canada): 908.42 MHz
Certified: Z-Wave Plus
Generic Device Type: Thermostat
Node type (C-wire): Always On Slave (AOS)
Node type (Battery): Listening Sleeping Slave (LSS)
Z-Wave Chipset: ZM5202AU
Supported Z-Wave Command Classes:
Z-Wave Plus Info V2
Supervision V1
Transport Service V2
Association V2
Version V2
Association Group Information V2
Basic V1
Battery V1
Clock V1
Configuration V4
Device Reset Local V1
Manufacturer Specific V2
Sensor Multilevel V5
Notification V3
Powerlevel V1
Security 2 V1
Thermostat Fan Mode V3
Thermostat Fan State V1
Thermostat Mode V3
Thermostat Operating State V1
Thermostat Setpoint V2
• Compatible with Honeywell Lyric Controller and ProSeries alarm control panels
• Designed for battery operation (3 x AA batteries) or for 24 VAC power operation (via a "C" or common wire)
• Compatible with most single and multi-stage conventional and heat pump systems
• Designed to work with any Z-Wave compliant controller or gateway; however, a security enabled Z-Wave Plus Controller is recommended to fully utilize all thermostat features
• Works with millivolt systems
• Does not work with electric baseboard heat (120-240V)