PC5320 - DSC Multiple Wireless Alarm Receiver Module

Please Note: The DSC PC5320 multiple wireless alarm receiver has been discontinued without replacement.

Description
Specifications
PDF Documents
Compatible

DSC PC5320 Product Description:

The DSC PC5320 multiple wireless alarm receiver module can be used to connect up to (4) DSC RF5132-433 wireless alarm receivers to any DSC PowerSeries security system. The PC5320 multiple wireless alarm receiver module supports the RF5132-433, PC5132-433 and RF5108-433 wireless alarm receivers on the 433 MHz range and also the older PC5132-900 wireless alarm receiver on the 900 MHz range.

If you have older DSC wireless sensors that operate on the 900 MHz range and you want to upgrade your security system with new wireless sensors on the 433 MHz range, the PC5320 allows you to use both types of wireless sensors. The PC5320 multiple wireless alarm receiver module is also good if you need to increase the wireless range of your DSC security system within your property.

Select a location that insures that the maximum wire run distances do not exceed the guidelines. The PC5320 can be mounted in the existing control panel or a separate plastic housing. Wireless programming is not allowed if any of the receivers connected to the PC5320 are in supervisory trouble (e.g. missing from the Keybus). If the receiver is removed from the PC5320, the PC5320 supervision must be reset.

Product Features:

LED Field: The LEDs on the PC5320 indicate the status of the connected receiver modules. The four LEDs on the PC5320 PCB indicate the status of the connected receivers. The LEDs will not turn on until at least one wireless zone serial number has been programmed. If the PC5320 module loses communication with the receiver, the corresponding LED will flash. If there is a problem with the Keybus between the panel and the PC5320, all LEDs will flash
Zone Supervision: All zones are supervised by all of the receivers connected. A zone supervisory trouble will occur if a transmitter supervisory signal is not received by any of the connected receivers during the programmed time period.
Zone Tampers, Violations and Restorals: Zone tampers, violations and restorals are processed by the PC5320. When a receiver connected to the PC5320 detects a tamper, violation, or restoral the PC5320 will send the information to the panel.
Module Tampers and Troubles: The PC5320 tamper has a tamper input. If the PC5320 has a tamper condition the panel will display "PC5132 Tamper". If a receiver connected to the PC5320 has a tamper condition, the panel will display "PC5132 Tamper". The tamper trouble will not be restored until the tamper is restored on the PC5320 module and all connected receivers.