LTE-L57V - Resideo Honeywell Home Cellular Verizon LTE Alarm Communicator (for LYNX Touch L5200/L5210/L7000 Control Panels)

Please Note: The Honeywell LTE-L57V cellular Verizon alarm communicator (for LYNX Touch Panels) has been discontinued without replacement.

Description
Documents
Specifications
Compatible

Honeywell Home LTE-L57V Product Description:

The Honeywell LTE-L57V is a cellular alarm communicator, designed for use with the LYNX Touch L5200, LYNX Touch L5210 and LYNX Touch L7000, that sends UMTS/HSPA dual-band alarm signals over the Verizon LTE cellular towers to GeoArm's central station. The LTE-L57V is easy to maintain and replace. Easy to diagnose LED's provide signal strength and status indication. Through this LTE-L57V cellular alarm communicator, control panel data can be uploaded and downloaded via the LTE module which furthers the simplification of the setup. These next-generation LTE communicators utilize 256-bit AES encryption for a higher level of security.

Product Features:

Full Contact ID: Contact ID reporting using ECP mode with compatible Honeywell control panels.
256-bit AES Encryption: Advanced encryption standard used for secure communications.
Upload/Download: Available with select Honeywell LYNX control panels.
Integration: Quick and easy installation of cellular communicator for LYNX L5200/L5210/L7000 controls.
Diagnostic LEDs: Provide signal strength and status indications.
QOS: Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
AlarmNet360™ Online Management Platform: Remote programming and diagnostics
Remote Services Capability: Optional Honeywell Total Connect remote services provide on-the-go security and home control, video viewing, and real-time alerts, anytime, anywhere, on any PC or smart device.
FOTA Firmware Upgrading: Complete over-the-air firmware upgrading capability. Provides remote service management ability.
Design: Integrated Vista ECP design, four-wire connection, LTE Cat 1

Please Note: The LTE-L57V cellular alarm communicator is compatible with LYNX Touch L5200/L5210/L7000 Panels that are Rev. 9.0+.

Honeywell Home LTE-L57V Product Documents:

• Honeywell LTE-L57V Cellular Alarm Communicator - Data Sheet
• Honeywell LTE-L57V Cellular Alarm Communicator - Installation Guide

Honeywell Home LTE-L57V Product Specifications:

Dimensions: 4.75" x 2.5" (12.1cm x 6.4cm)
Input Voltage: 5V
Current Drain: 490mA
RF Antenna: Internal Penta-Band antenna with receive diversity for LTE CAT1. Average 2.4 dBi gain.
Operating Temperature: -4° to 131°F (-20° to 55° C)
Storage Temperature: -40° to 158°F (-40° to 70° C)
Agency Listings: ETL Listed
Panel Compatibility: L5200/L5210/L7000 LYNX Controllers (Revision Version 9.00.xxx)