iPCAM-PT2A - Honeywell AlarmNet Wireless Pan/Tilt Indoor Security Camera (for Total Connect 2.0)

Please Note: The Honeywell iPCAM-PT2A pan/tilt security camera has been discontinued without replacement.

Description
PDF Documents
Specifications
Compatible

Honeywell iPCAM-PT2A Product Description:

The Honeywell iPCAM-PT2A is a wired/wireless, indoor IP internet video security camera with pan/tilt ability for AlarmNet Total Connect 2.0 interactive services. The iPCAM-PT2A is ideal for monitoring your home, business or public facilities. The ipCAM-PT2A comes equipped with a mounting plate, extension cable, GPIO connector, power transformer and camera.

This iPCAM-PT2A camera is for indoor use only. DO NOT mount this camera within 1 foot of any wireless device. To utilize this camera, you must have an AlarmNet account for a LTE or Internet communicator, or a "Video Only" account activated by GeoArm. Internet access with a router capable of DHCP hosting. For wireless, the router must also support one button WPS data encryption. If this is not available, order the Honeywell WAP-Plus Wireless Access Point for connection to your router.

Local viewing with this camera can be done through the L5210/L7000/Lyric Controller panels at v700657+, the VAM, or the TUXWiFi at v5.1.9.0+. You do not need a Total Connect account for local viewing, but the camera must be connected to the same LAN as the viewing interface.

Some major features of this camera are:
✓ Automatic low-light function (0 Lux level) supported by a special night lens and IR LEDS.
✓ Pan and Tilt color video can be controlled and monitored remotely.
✓ Supports WEP 64/128 bit, WPA or WPA2 Personal encryption.
✓ Supports WPS enrollment (Wi-Fi Protected Setup), which is a standard for easy setup of a secure wireless network.
✓ Auxiliary LED lighting that improves the quality of video up to 15 feet in low-level light situations.
✓ Wired or Wireless communications to a router or access point. Wireless communications utilizes the 802.11n protocol with WPS security. WPS (Wi-Fi Protected Setup) is a standard for easy setup of a secure wireless network.
✓ Color video can be monitored through your Total Connect remote services account. Up to 6 cameras can be used per location.

IMPORTANT: This camera is for indoor use only. DO NOT mount this camera within one foot (0.3m) of any wireless device.

Video Features:

Image Sensor - - CMOS ¼" VGA & HD compatible resolution
LENS - Fix Focus Lens F2.0, Effective range
LENS Diagonal View Angle - 55.8° (Horizontal=46.8°, Vertical=35.8°)
Compression - - H.264, MPEG-4 SP, M-JPEG
Resolution - 1280 x 720 capable, VGA, QVGA, QQVGA
Frame Rate - Up to 30 fps
Image Control - Brightness, Sharpness, White Balance, Contrast

Pan/Tilt Features:

Pan Range - Pan Range 320° (Left 160° - Right 160°)
Tilt Range - Tilt Range 120° (Up 90° - Down 30°)

Wireless (RC8061):

Standard - IEEE 802.11N/b/g
Encryptions - WEP 64/128 bit, WPA/WPA2 Personal

Honeywell iPCAM-PT2A Product Documents:

• Quick Installation Guide for Honeywell Wireless Security Camera (iPCAM-PT2A)

Honeywell iPCAM-PT2A Product Specifications:

Dimensions: 5.7" H x 3.8" W x 3.1" D
Case Color: White
Weight: 1.5 lbs.
Connector Ethernet: RJ-45 for Ethernet, DC Power Jack, 3.5mm Jack for Audio Out, One D/I and One D/O
LED and Button: LED: Power, Active, Network/Button: WPS, Reset
Bright Light LED: White light LED x 4/up to 15 ft.
Motion Sensor: Sensitivity Distance 5M
Power Adapter: 12V/1A, 100-240VAC
Certification: CE, FCC/Power Supply: UL
Operating Temperature: 23°C - 122°C (5°F to 50°F)
Privacy Button: Privacy button for video enable/disable