iPCAM-WL - Honeywell AlarmNet Wireless Fixed Low-Light Indoor Security Camera (for Total Connect)
Please Note: The Honeywell iPCAM-WL wireless fixed security camera has been discontinued and replaced by the iPCAM-WIC1 model number.
Honeywell IPCAM-WL Product Description:
The Honeywell iPCAM-WL is a wireless, low-light, internet video security camera for AlarmNet Total Connect 2.0 interactive services. The iPCAM-WL is ideal for monitoring your home, business or public facilities. There is a mounting plate, built-into the stand. The iPCAM-WL is perfect for wall or ceiling mounting, and can be detached by depressing the Unlock button.
This camera is for indoor use only. DO NOT mount this camera within 1 foot of any wireless device. To utilize this camera, you must have an AlarmNet account for a GSM or Internet communicator, or a "Video Only" account activated by GEOARM. Internet access with a router capable of DHCP hosting. For wireless, the router must also support one button WPS data encryption. If this is not available, order the Honeywell WAP Wireless Access Point for connection to your router.
Some major features of this camera are:
✓ Automatic low-light function (0 Lux level) supported by a special night lens and IR LEDS.
✓ Wired or Wireless communications to a router or access point. Wireless communications utilizes the 802.11n protocol with WPS security. WPS (Wi-Fi Protected Setup) is a standard for easy setup of a secure wireless network.
✓ Color video can be monitored through your Total Connect remote services account. Up to 6 cameras can be used.
IMPORTANT: This camera is for indoor use only. DO NOT mount this camera within one foot (0.3m) of any wireless device.
Video Features:
- Video Compression - H.264. MPEG-4 SP, M-JPEG
- Video Streaming - Simultaneous H.264, MPEG-4 and M-JPEG
- Image Settings - Flip, Mirror, AWB (Auto-White Balance), AGC (Auto-Gain Control), Contrast, Sharpness, Brightness
- Resolution and Frame Rate - VGA, QVGA, Up to 30 fps (frames per second)
Sensor and Lens Features:
- Image Sensor - 1/5 CMOS Sensor
- Miniumum Illumination - 0 Lux (with IR LED)
- Lens - Fix Focus Lens, Aperture: F2.0, Diagonal View Angle: 61° (Horizontal=50°, Vertical=39°)
Network:
- Ethernet - 10/100 Base-T, Auto-MDIX
- Protocols - TCP/IP, HTTP, HTTPS, IPv4, RTSP/RTP, RTCP, QoS, DHCP, NTP, FTP, SMTP, DNS, DDNS, UPnP, IGMP, ICMP, Customized API Protocol Compatible
- Wireless - IEEE 802.11b/g/n, WEP 64/128 bit, WPA/WPA2 Personal
Honeywell IPCAM-WL Product Documents:
• Quick Installation Guide for Honeywell Wireless Security Camera (IPCAM-WL)
• Planning Camera Installation for Honeywell Wireless Security Camera (IPCAM-WL)
Honeywell IPCAM-WL Product Specifications:
- Dimensions: 3.11" H x 3.11" W x 0.91" D (79mm W x 79mm H x 23mm)
- Case Color: White
- Connectors: RJ-45 for Ethernet, DC Power Jack
- Processors and Memory: SoC: ARM9, 300M Hz | RAM: 128 MB | Flash: 16MB
- LED and Button: LED: Power, Network | Button: WPS/Reset
- Night Vision: IR LED x 10, Light Sensor x 1
- Power Consumption: 12VDC, Max 5.8W
- Agency: FCC, CE; Power Supply: UL
- Operating Temperature: 0°C - 40°C (32°F to 104°F)
- Operating Humidity: 0&per; - 80&per; RH (non-condensing)
- Storage Temperature: 20°C - 70°C (4°F to 158°F)
- Storage Humidity: 0&per; - 90&per; RH (non-condensing)
- Ethernet Cable, Power Supply: 12V/1A, 100-240VAC
Honeywell IPCAM-WL Product Compatibility:
• L5200
• L7000
• TOTALCONNECT2.0
• TUXWIFIW
• VAM
• L5200-CN
• L7000-CN
• L7000LA
• VIDEO ALARM VERIFICATION
• TUXWIFIS
• L5210
• L5210-CN
• L5210LA
• LYRIC CONTROLLER
• LYRIC GATEWAY
• LYRIC CONTROLLER CANADA
• READYGD5200
• READYGD7000
