45602 - GE Jasco Z-Wave Wireless Lighting Control Module w/Dimmer
Please Note: The Jasco 45602 wireless lighting control module with dimmer has been discontinued without replacement.
GE 45602 Product Description:
The GE Jasco 45602 is a Z-Wave wireless plug-in lighting control dimmer enables wireless control of on/off and dim functions for standard incandescent table and floor lamps. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet. The 45602 provides a enabled outlet for the lamp that you would like to control and a regular pass through AC outlet for other electrical devices.
Product Features:
- One Z-wave controlled AC outlet for standard incandescent lighting
- Remote ON/OFF and Brightness control via the Z-Wave controller
- Manual ON/OFF and Brightness control with the front panel push button
- Load-Sensing turns the light ON if the switch on the connected light is used instead of the remote or push button on the Z-Wave module (default setting is disabled)
- One Always-ON pass-through AC outlet
- Space efficient design
- Does not block the lower outlet when plugged in to the upper outlet of a duplex wall receptacle. (This assumes that the duplex receptacle is mounted with the ground pin down.)
- Plugs and cords for connected devices route to the side allowing close placement of furniture
- Grounded 3-wire power connection for safety
GE 45602 Product Specifications:
- Dimensions (H x W x D): 7" x 8" x 1.8"
- Signal (Frequency): 908.42 MHz
- Maximum load for both outlets: 15 Amps, 1800W Resistive
- Maximum load for the Z-Wave controlled outlet: 5A 300 W Incandescent Z-Wave controlled outlet is fused @ 5A. This fuse is not user serviceable.
- Operating Temperature Range: 32-104° F (0-40° C)
- Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
- Weight: 14.10 oz
