CDMAEZ - Uplink Universal Primary/Redundant Cellular CDMA Alarm Communicator
Please Note: The Uplink CDMAEZ universal cellular CDMA alarm communicator has been discontinued and replaced by the LTE30EX model number.
Uplink CDMAEZ Product Description:
The Uplink CDMAEZ is a primary and redundant universal cellular CDMA alarm communicator for most existing security systems. The Uplink CDMAEZ is an "always on," multi-purpose, FCC-certified device capable of sending and receiving alarm signals or other data over the CDMA Cellular Network.
When connected to an alarm system, the CDMAEZ will send alarm signals over the cellular network to Uplink's alarm processing center, that will forward the signals to the appropriate monitoring station and/or selected email addresses. The CDMAEZ can be connected to an alarm system using up to four inputs on the CDMAEZ. Each of these inputs can be set up to send a selected signal to the GeoArm monitoring station. Contact ID, SIA, Modem IIe/IIIa2 and 4/2 (:20 PPS) formats are supported. The CDMAEZ also has two configurable relay outputs to send signals to alarm panels or control other devices. The customer-supplied 12 V DC power supply/battery charger should be capbable of supplying 500 mA peak for brief high current demands of the radio during transmission.
Product Features:
- Universal cellular communications, for summary event reporting
- Power from the panel or separate 12V DC power supply
- Two web configurable outputs
- Installs in minutes with complete end-to-end signal verification
- Smart siren bell sampling to detect burglary or fire condition
- Web and smartphone apps for remote arming and disarming
- Programmable periodic test intervals
- Works with virtually any central station (including GeoArm)
- Uplink Remote for interactive control and DIY notifications
Uplink CDMAEZ Product Documents:
• Data Sheet for Uplink CDMAEZ Universal CDMA Cellular Communicator
Uplink CDMAEZ Product Specifications:
Product Dimensions (Height x Width x Depth): 4.75" H x 3.3" W x 1.3" D
Four Inputs: Input 1: Connect to siren/bell (distinguishes between burg/steady and fire/pulsed) or programmable to 12 volts; Inputs 2-4: 12 volts
Central Station: Contact ID, SIA, Pulse 4/2 (:20 PPS) and modem IIe/IIIa2, Internet or dial-up
Relay Outputs: Two Configurable
Other Reporting: Low voltage, Email alerts to customer or GeoArm alarm company
Testing: Weekly or daily
Status LEDs: Signal strength, Network, Service, Communications
Power Requirements: 12V DC, 500 mA max on transmit, 28mA standby
CDMA: Compatible with CDMA networks
Cellular Frequencies: 850/1900 MHz
Transmit Power: Maximum allowable: 1.0W at 1900 MHz, 2.0W at 850 MHz
Antenna: 3.75 inches
Optional Accessories: Magnet mount antenna with 9ft cable - part number 1004ANT, 8 inches tall high gain antenna with articulating joint - part number 1005ANT
