ADC-SG130 - Alarm.com Tabletop Smart Gateway (for ISP/WiFi Security Camera Connectivity)
Alarm.com ADC-SG130 Product Description:
The Alarm.com ADC-SG130 is tabletop smart gateway designed for Alarm.com video surveillance products. With the ADCSG130 gateway in place, you can change internet service providers, or change WiFi credentials which cause the cameras to lose connectivity (and thus cannot be accessed) using the GeoArm Alarm.com portal. With this device (ADC-SG130), we create a dedicated network just for the cameras. If the customer makes changes to their WiFi settings, no need to send a truck, since this is plugged into their existing router so the cameras will keep working. If the customer changes their internet service provider, they need only re-plug this device into their new router.
With a reliable wireless connection and excellent range, the ADC-SG130 makes it easy to install any Alarm.com Wi-Fi camera. The ADC-SG130 features WPS, eliminating the need to update cameras with complicated router passwords. Simply plug the ADC-SG130 into any wall outlet, connect to the existing router, pair with a WiFi camera, and enjoy instant, secure connectivity.
Product Features:
- WiFi Access Point (2.4 GHz)
- Reliable network for Alarm.com WiFi cameras, ensuring cameras stay connected when the homes network SSID, password, or ISP changes
- Remote management and troubleshooting
- Enhanced customer experience
Alarm.com ADC-SG130 Product Specifications:
- Ethernet Connection: 10/100 Mbps (fast) WAN connection
- WiFi Connection: 802.11 b/g/n, 2.4 GHz
- Dimensions without plug (H x W x D): 3.5 x 3.1 x 1.2" (11.6 x 8.0 x 3.1 cm)
- LED Indicators: 4
- Buttons: Function, WPS, Reset
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Operating Humidity: 0 to 80% (non-condensing) RH
- Power: 12 VDC Power Adapter
- Network: Broadband Internet connection with router
- Network size: Up to 4 cameras recommended
- Power LED Status: On - Device is powered on | Off - Device is powered off | Flashing - Device is booting
- Data/Ethernet LED Status: On/Flashing - Device transferring/receiving data over Ethernet. | Off - No data is being transferred over Ethernet. Please check the Ethernet connection between the Smart Gateway and the router.
- Communication LED Status: On - Connected to Internet | Off - No local or Internet connection | Flashing (slowly) - Local connection, no internet | Flashing (five quick blinks) - Communication test initiated
- WiFi LED Status: On - Active | Off - Inactive | Flashing - WPS mode
- Additional States LED Status: All LEDs flashing (escalating) - Firmware upgrade in progress | All LEDs flashing (simultaneously) - Reset in progress
Alarm.com ADC-SG130 Product Documents:
• Data Sheet for Alarm.com Smart Gateway (ADC-SG130)
• Installation Guide for Alarm.com Smart Gateway (ADC-SG130)
• Not Broadcasting to WiFi Network for Alarm.com Smart Gateway (ADC-SG130)
• Configure Video Device for Plug-and-Play for Alarm.com Smart Gateway (ADC-SG130)
• Important Installation Considerations for Alarm.com Smart Gateway (ADC-SG130)
• Adjust Who Can View WiFi Password for Alarm.com Smart Gateway (ADC-SG130)
• Connect Video Device Using WiFi Protected Setup (WPS) for Alarm.com Smart Gateway (ADC-SG130)
• Factory Reset to its Default Settings for Alarm.com Smart Gateway (ADC-SG130)
• Find Video Devices for Alarm.com Smart Gateway (ADC-SG130)
• Share Network Credential with Video Device for Alarm.com Smart Gateway (ADC-SG130)
• View WiFi Name SSID and Password for Alarm.com Smart Gateway (ADC-SG130)
• Troubleshoot Camera Appears Connected but Disconnected on Video Page for Alarm.com Smart Gateway (ADC-SG130)
Alarm.com ADC-SG130 Product Includes:
- ADC-SG130 Smart Gateway
- Power Adapter
- Ethernet cable
- Quick Installation guide
