ADC-SEM300-VT-VZ-M - Alarm.com SEM Dual-Path Ethernet/Cellular Verizon LTE-M Alarm Communicator (for Honeywell VISTA Panels)
Alarm.com ADC-SEM300-VT-VZ-M Product Description:
The Alarm.com ADC-SEM300-VT-VZ-M is a dual-path system enhancement module (SEM) designed to migrate compatible Honeywell/Ademco VISTA-10P, VISTA-15P, VISTA-20P and VISTA-21iP panels to Alarm.com's award-winning interactive services. The ADC-SEM300-VT-VZ dual-path SEM supports the Verizon 4G LTE-M cellular network and optional broadband ethernet. The multiple paths ensures the longest life cycle with the most secure and reliable service. The SEM is now ETL certified, ensuring a high benchmark of safety and sustainability.
The SEM300 enable wireless reporting of alarms and other system events using the LTE-M wireless (cellular) network and Broadband Ethernet. With the SEM300 you can configure and support installations from any browser or smartphone using Alarm.com's familiar and easy-to-use web and mobile support tools, including the Partner Portal and MobileTech app. And, enable Alarm.com interactive monitoring and alerting for end-users. Lastly, you can integrate Alarm.com's home automation and energy management services with the SEM's built-in Z-Wave Plus capabilities.
For remote programming to be available, the panel must support the downloader feature. This feature is available on most panels with a minimum of v5.2. The SEM300 is compatible with Honeywell/ADEMCO panels and the equivalents, dating back to 2005. The Honeywell/ADEMCO VISTA-21iP is also compatible when the Internal IP/GSM jumper switch is set to the OFF position.
Product Features:
- Fast, reliable, and secure wireless signaling
- Cellular 4G Verizon LTE-M primary communication path
- Broadband as an optional secondary communication path
- Remote monitoring and control using the website and app
- Remote panel configurations with Uploader/Downloader, including Add Sensors
- Remote access and management of locally saved user codes
- Home automation and energy management
- Support for Z-Wave Plus devices
- Video monitoring
- Cover and wall tamper included
- Externally facing LEDs for visual feedback
- Internal Antennas
- No separate power supply needed
- Over the air (OTA) upgrades
- CID and SIA central station signaling
- Enable Alarm.com interactive monitoring and alerting for end users
- ETL Listed to UL985, UL1023 and ULC S545
- Configure and support installations from any browser or smartphone using Alarm.com's familiar and easy-to-use web and mobile support tools, including the Partner Portal and MobileTech
Note: The Cat-M variant only requires the primary antenna. Cat-M uses the 4G LTE Cat-M1 network, no fallback.
Alarm.com ADC-SEM300-VT-VZ-M Product Documents:
• Data Sheet for Alarm.com System Enhancement Module (ADC-SEM300-VT-VZ-M)
• Installation Guide for Alarm.com System Enhancement Module (ADC-SEM300-VT-VZ-M)
Alarm.com ADC-SEM300-VT-VZ-M Product Specifications:
- Enclosure Dimensions (L x W x D): 7.66 x 4.35 x 1.65 in. (19.46 x 11.05 x 4.19 cm)
- Enclosure Color: White
- Case Material: Fire-retardant PC/ABS, PC
- Compatibile: Honeywell/Ademco VISTA 10P, 15P, 20P and 21iP panels (manufactured 2005 or later and version 3.1+)
- Not Compatible: POTS. The SEM should be the only communication path for alarm signaling to the GeoArm monitoring station.
- Power Requirements: 12 V nominal, 125 mA nominal (continuous), 230 mA max
- Cellular Network: Verizon 4G LTE with 3G HSPA, 2G GSM fallback
- Panel Interfaces: Two keypad BUS connections, 12 V power and ground
- Enclosure Interfaces: Five LEDs (red, green, yellow, or blue)
- Alarm.com Module Indicators: One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs
- SEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED
- Z-Wave Frequency: 908.4 MHz
- Operation temperature: 14° - 131° F (-10°C - 55°C)
- Storage temperature: -30° - 140° F (-34°C - 60°C)
- Humidity: 90% relative humidity, non-condensing
Alarm.com ADC-SEM300-VT-VZ-M Recommended Tools:
- Screwdrivers: Small blade and Phillips
- Drill and bits for screws and/or wall anchors
- Ethernet cable
- Alpha keypad (not required) - Alarm.com strongly recommends installing an alpha keypad to ensure the failure to communicate (FTC) trouble condition is displayed to the user.
- Four-conductor, 22 AWG or larger stranded wire (Maximum wire length of 40 feet)
Alarm.com ADC-SEM300-VT-VZ-M Product Compatibility:
- Honeywell/ADEMCO VISTA-10P
- Honeywell/ADEMCO VISTA-WA10P
- Honeywell/ADEMCO VISTA-10PSIA
- First Alert FA130CP
- First Alert FA130CPSIA
- Honeywell/ADEMCO VISTA-15P
- Honeywell/ADEMCO VISTA-WA15P
- Honeywell/ADEMCO VISTA-15PSIA
- First Alert FA148CP
- First Alert FA148CPSIA
- Honeywell/ADEMCO VISTA-20P
- Honeywell/ADEMCO VISTA-WA20P
- Honeywell/ADEMCO VISTA-20PSIA
- First Alert FA168CPS
- First Alert FA168CPSSIA
- Honeywell/ADEMCO VISTA-21iP (Important: The SEM300 is compatible with the VISTA-21iP, if the Internal IP/GSM Jumper is set in the OFF position. Verify the SEM is powered down before setting the jumper to OFF.)
