ADC-EPB-BC2.1-DSC - Alarm.com Stationary Emergency Call Button (w/DSC Transmitter)
Alarm.com ADC-EPB-BC2.1-DSC Product Description:
The Alarm.com ADC-EPB-BC2.1-DSC is stationary emergency button with a DSC trasmitter for secure independant homecare and senior living. The ADC-EPB-BC2.1-DSC emergency button grants caregivers real-time insight into each client's current conditions as well as potential emergency problems.
Alarm.com ADC-EPB-BC2.1-DSC Product Documents:
• Datasheet for Alarm.com Emergency Call Button w/DSC Transmitter (ADC-EPB-BC2.1-DSC)
Alarm.com ADC-EPB-BC2.1-DSC Product Specifications:
- Enclosure: 4.75 in. x 2.25 in. (Diameter x Depth) Black, ABS plastic base with slip-resistant feet and 3 x AAA battery housing for optional audible message on button press Red, ABS plastic, spring-loaded push button
- Electronic Signaling: Battery-powered filter circuit with integrated 433 MHz (crystal-controlled) DSC-compatible transmitter with 64 minute supervisory interval
- Sensing Interface: Filtered, normally open (i.e. when not pressed), momentary contact switch
- Battery Life: Replaceable 3x AAA battery: 2+ years
Alarm.com ADC-EPB-BC2.1-DSC Product Programming:
- Use the Alarm.com AirFX "Add a Sensor" page or the panel interface to add the button to the account. Set the "New Sensor Information" as shown in the chart. Please note that Zone Definition 15 should be used if the button will signal an emergency. Zone definition 26 can be used if the button will not signal an emergency.
- After the sensor is added to the system, change the sensor type to "Push Button." From the Equipment page of the Dealer Website click Change to the right of the sensor's name. Select the "Change Sensor Type" action, and update the new sensor type to "Push Button."
Sensor ID Select an unused ID
Zone Definition 15 (Emergency) or 26 (Non-Emergency)
Sensor Name Any
Serial Number (ESN) On the bottom of the sensor
Alarm.com ADC-EPB-BC2.1-DSC Product Installation:
Locate the sensor within 100 feet of the base station. Ensure that the On/Off switch on the base of the button is set to the "On" position. The sensor can be mounted using the included mounting plate and mounting hardware or simply place the sensor on a flat surface in a visible location.
Product Reviews
Security and safety with medical alert, June 24, 2021
Posted By: Thomas
6 people found this review helpful
Really easy to use and set up. It was a great sense of relief to have it for my Mom in case anything were to happen to her when we are not around. We really love that it works with the tech she already has as well! Would buy again.
6 people found this review helpful
Really easy to use and set up. It was a great sense of relief to have it for my Mom in case anything were to happen to her when we are not around. We really love that it works with the tech she already has as well! Would buy again.
