60-760-01-95R - GE Interlogix Quik Bridge Supervised 1-Channel Wireless Alarm Signal Receiver
Please Note: The Interlogix 60-660-01-95R Quik Bridge supervised 1-channel wireless receiver has been discontinued without replacement.
GE Interlogix 60-760-01-95R Product Description:
The GE Interlogix 60-760-01-95R Quik-Bridge supervised 1-channel wireless alarm receiver adds wireless capability to a hardwired alarm control panel. Up to (2) Interlogix wireless sensors can be monitored using (2) alarm zone inputs on the alarm control panel. One zone input is used for alarm and tamper activations, while the other zone is used for low battery and supervisory monitoring.
In addition to alarm and tamper messages, Interlogix wireless sensors also transmit low-battery and supervisory messages. The 60-760-01-955 Quik-Bridge 1-channel wireless alarm receiver carefully "supervises" all of these messages. Alarm and tamper messages activate the alarm relay, which triggers an alarm event. Low-battery messages activate the supervised relay and cause the alarm receiver LED to flash every (4) seconds as a trouble indicator. Supervisory transmission's do not activate any alarm zone or relay, they simply let the alarm receiver know that the sensor is working properly. If the sensor stops sending supervisory information, however, the supervised relay of the alarm receiver is activated and the LED double-flashes every (4) seconds. If this coincides with a wireless sensor low-battery condition, the alarm receiver will triple-flash every (4) seconds.
While this is a Interlogix wireless alarm receiver, it will actually work with any alarm control panel that supports a common-loop ground for one or more its alarm zones. The 60-760-01-95R Quick-Bridge wireless alarm receiver is compatible with Interlogix wireless motion detectors, wireless smoke detectors, wireless panic buttons, and wireless door/window alarm contacts.
