2GIG-WT00Z-1 - 2GIG Wireless Z-Wave 3-Way Wall Accessory Switch
Please Note: The 2GIG-WT00Z-1 wireless Z-Wave 3-way wall accessory switch has been discontinued without replacement.
2GIG-WT00Z-1 Product Description:
The 2GIG-WT00Z-1 is a wall mount accessory dimmer switch that allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.
The paddle on the WT00Z-1 allows the user to; turn the associated devices on or off, tapping top of switch turns the associated device ON, tapping bottom of switch turns the associated device OFF. Additionally, the paddle on the WT00Z-1 allows the user to; dim the associated devices, press and hold the top of switch to increase the intensity of the associated, press and hold the bottom of switch to decrease the intensity of the associated device, tapping top of switch turns the associated device ON to the previously set level, tapping bottom of switch turns the associated device OFF.
The WT00Z-1 3-Way Wall Mount Accessory Dimmer/Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown and almond.
Product Features:
- Network wide inclusion
- Connect up to 5 devices to create virtual 3,4,5,6,7-way operation
- Requires Minimote
- Security beaming
- Z-Wave compatible
Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.
2GIG-WT00Z-1 Product Specifications:
- Maximum Load: None
- Signal (Frequency): 908.42 MHz
- Range: Up to 130 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Power Input: 120VAC, 60Hz
