2GIG-BRDG1-900 - 2GIG Go!Bridge Internet Alarm Communicator

Please Note: The 2GIG-BRDG1-900 Go!Bridge internet alarm communicator has been discontinued without replacement.

Description
Specifications
Documents
Requirements
Includes

2GIG-BRDG1-900 Product Description:

The 2GIG-BRDG1-900 Go!Bridge™ IP Communicator provides internet connectivity between the GC2 Panel and the GeoArm central station. It supports firmware updates over the Internet, provides interactive security services, and enables supervision using signal-forwarding to the GeoArm central station. For wireless communication with the control panel, the 900MHz transceiver Module (2GIG-XCVR2-345) must be installed in the panel. The Go!Bridge also connects to the Internet via a local network router using an Ethernet cable (not provided).

Please take note, should the local network lose internet access due to a power outage or interruption, the 2GIG-BRDG1-900 Go!Bridge IP Communicator is not equipped with a backup battery system. To best prepare for power failures and to ensure the security system maintains internet access with the GeoArm monitoring service for life?safety communications during power failures, the local network must have a dedicated Uninterrupted Power Supply (UPS) or backup battery solution from a third?party manufacturer in place. GeoArm does not supply, provide, recommend, or test the Go!Bridge with any UPS or battery backup solution. It is also assumed that DIYer's Internet Service Provider (ISP) maintains a backup battery (or power generator) for their remote network equipment.

Product Features:

Secure Internet reporting capabilities
256-bit AES Encryption
Wireless panel integration via 900MHz frequency
CAT5 Ethernet quick connection to hub/router
Full Contact ID with high-speed reporting
Remote access capabilities via Internet or smartphone
Easy install behind firewalls DHCP Addressing for IP network
Free firmware update option over the Internet
Compatible with Alarm.com® and Uplink®

2GIG-BRDG1-900 Product Specifications:

Wireless Signal Range: 500 ft (152.4 m), open air, with Wireless Control Panel
Transceiver: Silicon Labs SI1001-E-GM2
Transceiver Frequency: 25 channel frequency-hopping spread spectrum, 403 kHz channel spacing (910.2-920.275 MHz)
Modulation Type: GFSK modulation, 128 kpbs
RF Power: +19dBm Maximum
Ethernet: 10/100 BaseT
Dimensions (L x W x H): 6.24" x 4.5" x 1" in (159 x 114 x 25 cm)
Weight: 9.6 oz
Housing Material: Cycoloy™ Resin C2800 (Rated to UL 94 V-0: Flammability Standard)
Color: White
Operating Temperature: 32°F to 120.2°F, (0°C to +49°C)
Relative Humidity: 5-95&per; Non-Condensing
Operating Voltage: 5VDC
Certification: ETL, FCC, IC, IFETEL, and NOM