Please Note: The 2GIG-GNGRD1-345 gun motion detector has been discontinued without replacement.
The 2GIG-GNGRD1-345 is a gun motion detector designed for use with certain hand guns and rifles. The 2GIG gun motion detector is designed to send an alert, using the 345 MHz frequency, when there is natural movement. Built into a 3-digit combination trigger lock, the 2GIG Gun Motion Detector adds an important safety tool for firearm owners.
When properly installed, and if the gun is moved, signals are transmitted immediately to the 2GIG control panel. This signal alert can initiate a number of actions based on the programming of the 2GIG control panel. When testing the gun motion detector, please make sure the firearm is NOT loaded. After placing the 2GIG-GNGRD1-345 on a compatible firearm, perform a motion test by simply picking it up to verify that it can establish good Radio Frequency (RF) communications with the 2GIG control panel.
This product will not lock all firearms. It will block access to many guns when properly attached. Some lever action rifles, firearms without trigger guards surrounding the triggers, guns with extra light or extra wide triggers or guns with trigger shoes or extensions may not be able to be effectively locked with the 2GIG-GNGRD1-345 gun motion detector. The 2GIG Gun Motion Detector may be cut or defeated by a determined individual and may not prevent the use of a firearm.
Product Features:
- The only professionally monitored trigger guard available
- Hardened steel lock deters unauthorized use of a firearm
- Fits many handguns, rifles and shotguns having a trigger guard
- 3 digit combination trigger guard deters unintended use
- California Gun Safety (DOJ) Device Certified
- Not to be used on a loaded firearm
- Wireless Signal Range: 350 ft (107 m), open air, actual range may vary based on the wireless control panel being used
- Code Outputs: Supervisory; Low Battery; Movement
- Compatibility: 2GIG
- Transmitter Frequency: 345 MHz (crystal controlled)
- Unique ID Codes: Over one (1) million different code combinations
- Supervisory Interval: 70 minutes ± 10 minutes
- GoControl Sensor Type: Tilt Sensor
- Sensor Dimensions: 2.7 x 2.3 x 1.4 in (69.5 x 57.3 x 36.4 mm)
- Weight (including battery & magnet): 7.4 oz (210 g)
- Housing Material: ABS Plastic
- Color: Black
- Operating Temperature: -4° to 140°F (-20° to 60°C)
- Operating Relative Humidity: 0 to 90%, non-condensing
- Battery (included): One (1) CR 2032 or equivalent Lithium battery
- Projected Battery Life: 5 years
- Warranty: 2 years
- Certification: FCC: Part 15, ASTM: F2346-04, Cal Gun Safety Device
- (1) 2GIG Gun Motion Detector
- (1) CR2032 Battery (installed)